Wide range of SINGLE, TWIN AND THREE AXLE SPREADERS TRAILERS, adapted to the livestock market requirements.
All of them share a series of features which are the most important and significant base of a spreader trailer:
- Chasis superior e inferior de tubo estructural de acero, intercalados para una mayor resistencia y estabilidad.
- Upper and lower chassis of steel structural tube, interspersed for a higher resistance and stability.
- 4 parabolic leaf springs with a tandem suspension system with check straps, for models from 5.500 to 7.000 mm.
- Upper chassis, axles and leaf springs on its weight.
- Stainless steel sides AISI-304.
- Drawbar of conical folded sheet metal, height adjustment and removable.
- Hydraulic break with manual pump.
- Lower rids of 70x100 mm, placed on 450 mm from light.
Features
| Model |
RET-45 |
RET-50 |
RET-55 |
| Load
|
10.000 kg |
12.000 kg |
14.000 kg |
Volume
|
12,80 m3 |
14,36 m3 |
15,70 m3 |
| Approximate tare
| 5.000 |
5.420 |
6.200 |
| Floor length
| 4.500 |
5.000 |
5.500 |
| Floor width
|
2.200 |
2.200 |
2.200 |
| Side height
|
1.360 |
1.360 |
1.360 |
| Floor sheet metal thickness
|
4 mm |
4 mm |
4 mm |
| Nº of leaf spring sheets and length
|
6 of 1.360 |
7 of 1.360 |
7 of 1.360 |
| Leaf spring section
|
120x20 |
120x20 |
120x20 |
| Nº of wheels
|
4 renewed |
4 renewed |
4 renewed |
| Wheel dimensions
|
385/65-R22'5 |
385/65-R22'5 |
385/65-R22'5 |
| Axle dimensions
| 90x75 |
90x75 |
90x75 |
| Drum dimensions
| 350x60 |
350x60 |
350x60 |
Studs and axle track
| 8 to 1.900 |
8 to 1.900 |
8 to 1.900 |
Lower chassis
| 200x150x6 |
200x150x6 |
250x150x6 |
Brake cylinders
| 4 |
4 |
4 |
Nº of reducers / type
| 1/RT-350 |
1/RT-350 |
1/RT-500 |
Kappa hydraulic engine
| 100 |
100 |
150 |
Front wheel drive
| n5 |
n5 |
Homokinetic |
Longitudinal axe diameter
| 35 |
45 |
45 |
Front / rear transverse axle diameter
| 40/50 |
40/50 |
40/50 |
Nº of chains and model
| 4-100/8/14R |
4-100/8/14R |
4-100/8/14R |
R.P.M. beaters
|
540 |
540 |
540 |
Features
| Model |
RET-55 |
RET-60 |
| Load
|
14.000 kg |
16.000 kg |
Volume
|
15,70 m3 |
17,20 m3 |
| Approximate tare
| 6.300 |
6.700 |
| Floor length
| 5.500 |
6.000 |
| Floor width
|
2.200 |
2.200 |
| Side height
|
1.360 |
1.360 |
| Floor sheet metal thickness
|
4 mm |
4 mm |
| Nº of leaf spring sheets
|
3 |
4 |
| Leaf spring section
|
80x25 |
80x25 |
| Nº of wheels
|
4 renewed |
4 renewed |
| Wheel dimensions
|
385/65-R22'5 |
385/65-R22'5 |
| Axle dimensions
| 90x75 |
100x80 |
| Drum dimensions
| 350x60 |
350x60 |
Studs and axle track
| 8 to 1.900 |
8 to 1.900 |
Lower chassis
| 200x150x6 |
200x150x6 |
Brake cylinders
| 4 |
4 |
Nº of reducers / type
| 1/RT-500 |
1/RT-500 |
Kappa hydraulic engine
| 1/150 |
1/200 |
Front wheel drive
| Homokinetic |
Homokinetic |
Longitudinal axe diameter
| 45 |
45 |
Front / rear transverse axle diameter
| 40/50 |
40/60 |
Nº of chains and model
| 4-100/8/14R |
4-100/8/14R |
R.P.M. beaters
|
540 |
540 |
Features
| Model |
RET-65 |
RET-70 |
| Load
|
18.000 kg |
20.000 kg |
Volume
|
18,70 m3 |
20,19 m3 |
| Approximate tare
| 7.200 |
8.000 |
| Floor length
| 6.500 |
7.000 |
| Floor width
|
2.200 |
2.200 |
| Side height
|
1.360 |
1.360 |
| Floor sheet metal thickness
|
4 mm |
4 mm |
| Nº of leaf spring sheets
|
4 |
4 |
| Leaf spring section
|
100x25 |
100x25 |
| Nº of wheels
|
4 news |
4 news |
| Wheel dimensions
|
445/65-R22'5 |
445/65-R22'5 |
| Axle dimensions
| 120x85 |
130x90 |
| Drum dimensions
| 400x80 |
406x120 |
Studs and axle track
| 10 to 2.000 |
10 to 2.000 |
Lower chassis
| 300x150x6 |
300x150x8 |
Brake cylinders
| 4 |
4 |
Nº of reducers / type
| 1/RT-800 |
1/RT-500 |
Kappa hydraulic engine
| 1/250 |
2/100 |
Front wheel drive
| Homokinetic |
Homokinetic |
Longitudinal axe diameter
| 45 |
45 |
Front / rear transverse axle diameter
| 50/60 |
50/60 |
Nº of chains and model
| 4-100/8/14R |
6-100/8/14R |
R.P.M. beaters
|
1.000 |
1.000 |
