Wide range of TWIN DUAL AXLES FLAT BEDS, adapted to the agricultural market requirements.

All of our twin dual axles flat bed models share a series of features which are the most important and significant base of a flat bed:

• Upper and lower chassis of steel structural tube, interspersed for a higher resistance and stability.
• 4 parabolic leaf springs.
• Hydraulic brake with a cylinder on each wheel.
• Upper chassis, axles, leaf springs and bearing on its weight.
• Drawbar suspended with latch spring and adjustable.
• Lower rids of 70x100 mm, placed on 450 mm from light.

from 6.500 to 7.000 mm

Features

Model	2RP-65	2RP-70
Load	12 to 14.000 kg	13 to 15.000 kg
Approx. tare	2.400	2.600
Box length	6.500	7.000
Box width	2.450	2.450
Floor sheet metal thickness	4 mm	4 mm
Front leaf springs	2 leaves 70x25	2 leaves 70x25
Rear leaf springs	3 leaves 70x25	3 leaves 70x25
Nº of wheels	4 renewed	4 renewed
Wheel dimensions	385/65-R22'5	385/65-R22'5
Axle dimensions	80x75	90x75
Drum dimensions	300x60	350x60
Studs and axle track	6 to 1.900	8 to 1.900
Double screwed ball bearing	1.050x14	1.100x16
Lower chassis	200x80x6	200x80x6
Brake cylinder	4	4
Approx. height from flat to ground	1.300	1.300

from 7.500 to 8.500 mm

Features

Model	2RP-75	2RP-85
Load	14 to 16.000 kg	16 to 18.000 kg
Approx. tare	2.800	3.200
Box length	7.500	8.500
Box width	2.450	2.450
Floor sheet metal thickness	4 mm	4 mm
Front leaf springs	2 leaves 70x25	3 leaves 70x25
Rear leaf springs	3 leaves 70x25	3 leaves 70x25
Nº of wheels	4 renewed	4 renewed
Wheel dimensions	385/65-R22'5	385/65-R22'5
Axle dimensions	90x75	100x80
Drum dimensions	350x60	350x60
Studs and axle track	8 to 1.900	8 to 1.900
Double screwed ball bearing	1.100x16	1.100x16
Lower chassis	200x80x6	200x80x6
Brake cylinder	4	4
Approx. height from flat to ground	1.300	1.300