Wide range of 3 AXLES FLAT BEDS, adapted to the agricultural market requirements.
Our entire 3 axles flat bed models share a series of features which are the most important and significant base of a flat bed:
- Upper and lower chassis of steel structural tube, interspersed for a higher resistance and stability.
- 6 parabolic leaf springs with check straps and tridem suspension system.
- Hydraulic break on the three axles.
- Upper chassis, axles and leaf springs on its weight.
- Drawbar of conical folded sheet metal, height adjustment and removable.
- Hydraulic break with manual pump.
- Lower rids of 70x100 mm, placed on 450 mm from light.
from 8.500 to 10.500 mm
| Model | RPT-85 | RPT-95 | RPT-105 |
|---|---|---|---|
| Load | 18 to 20.000 kg | 20 to 22.000 kg | 22 to 24.000 kg |
| Approximate tare | 4.300 | 4.400 | 4.500 |
| Box length | 8.500 | 9.500 | 10.500 |
| Box width | 2.450 | 2.450 | 2.450 |
| Floor sheet metal thickness | 5 mm | 5 mm | 4 mm |
| Leaf springs without check straps (6 units) | 3 leaves 80x25 | 3 leaves 80x25 | 3 leaves 80x25 |
| Nº of wheels | 6 renewed | 6 renewed | 6 renewed |
| Wheel dimensions | 385/65-R22'5 | 385/65-R22'5 | 385/65-R22'5 |
| Axle dimensions | 90x75 | 100x80 | 100x80 |
| Drum dimensions | 350x60 | 350x60 | 350x60 | Studs and axle track | 8 to 1.900 | 8 to 1.900 | 10 to 1.900 | Chassis | 300x150 | 300x150 | 300x150 | Brake cylinders | 6 | 6 | 6 | Approx. height from flat to ground | 1.300 | 1.300 | 1.300 |